Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2006 >> Epica (CANADA) L6-2.5L >> Repair and Diagnosis >> Body and Frame >> Seats >> Service and Repair >> Seat Adjuster Replacement - Driver Side
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Seat Adjuster Replacement - Driver Side




Seat Adjuster Replacement - Driver Side

Removal Procedure




1. Remove the driver seat. Refer to Seat Replacement - Front Bucket Seat Replacement - Front Bucket.
2. Remove the front seat cushion. Refer to Seat Cushion Replacement - Front Seat Cushion Replacement - Front.
3. Disconnect the electrical connector.
4. Remove the bolts the screws, and the slide assembly.

Installation Procedure





Notice: Refer to Fastener Notice Fastener Notice in Cautions and Notices.

1. Install the slide assembly with the bolts and the screws.

Tighten
* Tighten the slide assembly bolts to 25 Nm (18 lb ft).
* Tighten the slide assembly screws to 10 Nm (89 lb in).

2. Connect the electrical connector.
3. Install the front seat cushion. Refer to Seat Cushion Replacement - Front Seat Cushion Replacement - Front.
4. Install the driver seat. Refer to Seat Replacement - Front Bucket Seat Replacement - Front Bucket.

pro multis · About Operation CHARM