Dome Lamp: Service and Repair
Door Lamp Replacement
Removal Procedure
Caution: Refer to Battery Disconnect Caution Battery Disconnect Caution in Cautions and Notices.
1. Disconnect the negative battery cable.
2. Remove the front door step lamp lens cover.
3. Reposition the lower half of the front door trim panel.
4. Remove the front door step lamp.
5. Disconnect the electrical connector.
Installation Procedure
1. Connect the electrical connector.
2. Install the replacement front door step lamp bulb.
3. Install the lower half of the door trim panel to its original position.
4. Install the front door step lamp lens cover.
5. Connect the negative battery cable.