Fluid - A/T: Service and Repair

Draining Transmission Fluid

Tools Required

DT 46475 (DW260-070) Auto Transaxle Oil Plug Remover/Installer

Removal Procedure





Notice: Refer to Vehicle Lifting and Jacking Notice Vehicle Lifting and Jacking Notice in Cautions and Notices.

1. Raise and suitably support the vehicle.
2. Place a fluid container below the fluid drain plug.
3. Use the DT 46475 (1) to remove the transaxle fluid drain plug.
4. Allow the transaxle fluid to drain.

Installation Procedure

Notice: Refer to Fastener Notice Fastener Notice in Cautions and Notices.




1. Use the DT 46475 to install the transaxle fluid drain plug.

Tighten the drain plug to 45 Nm (33 lb ft).

2. Add the transaxle fluid. Refer to Transmission Fluid Level Inspection Transmission Fluid Level Inspection.