Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2006 >> Epica (CANADA) L6-2.5L >> Repair and Diagnosis >> Powertrain Management >> Fuel Delivery and Air Induction >> Accelerator Pedal Position Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Accelerator Pedal Position Sensor: Service and Repair




Accelerator Pedal with Position Sensor Replacement

Removal Procedure




1. Turn the ignition switch to the off position.
2. Disconnect the electronic throttle control (ETC) connector from the accelerator pedal.




3. Remove the 3 accelerator pedal retaining bolts.
4. Remove the accelerator pedal.

Installation Procedure




1. Position the accelerator pedal.

Notice: Refer to Fastener Notice Fastener Notice.

2. Install the 3 accelerator pedal retaining nuts.

Tighten the upper accelerator pedal retaining bolts (1) to 10 Nm (89 lb in).

Tighten the lower accelerator pedal retaining bolt (2) to 23 Nm (17 lb ft).

3. Connect the ETC connector to the accelerator pedal.

pro multis · About Operation CHARM