Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2006 >> Express 2500 V8-6.6L DSL Turbo VIN 2 >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Boost Solenoid >> Service and Repair >> Turbocharger Vane Position Control Solenoid Valve Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Turbocharger Vane Position Control Solenoid Valve Replacement



TURBOCHARGER VANE POSITION CONTROL SOLENOID VALVE REPLACEMENT

REMOVAL PROCEDURE




1. Remove the engine cover.
2. Remove the turbocharger oil feed pipe banjo bolt and washer.
3. Reposition the oil feed pipe out of the way.




4. Disconnect the turbocharger vane control solenoid valve electrical connector.
5. Remove the vane control solenoid valve bracket bolt and bracket.
6. Remove the turbocharger vane control solenoid valve from the turbocharger.

INSTALLATION PROCEDURE




1. Install the turbocharger vane control solenoid valve to the turbocharger.
2. Install the vane control solenoid valve bracket and bolt.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the bolt to 23 N.m (17 lb ft).

3. Connect the turbocharger vane control solenoid valve electrical connector.




4. Position the oil feed pipe to the turbocharger.
5. Install a NEW turbocharger oil feed pipe washer and the banjo bolt.

Tighten the bolt to 34 N.m (25 lb ft).

6. Install the engine cover.
7. Perform the turbocharger learn procedure. Refer to Turbocharger Learn Procedure.
pro multis · About Operation CHARM