Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2006 >> HHR L4-2.2L >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Powertrain Management >> Relays and Modules - Ignition System >> Ignition Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ignition Control Module: Service and Repair



IGNITION CONTROL MODULE REPLACEMENT

REMOVAL PROCEDURE




1. Disconnect the ignition control module electrical connector.




2. Remove the ignition control module screws.
3. Remove the ignition control module from the ignition coil housing.

INSTALLATION PROCEDURE




1. Install the ignition control module in the ignition coil housing.

IMPORTANT: Make sure the interconnect and seal are lined up before module installation.

2. Install the ignition control module screws.

NOTE: Refer to Fastener Notice.

Tighten the screws to 1.5 N.m (13 lb in).




3. Connect the ignition control module electrical connector.
pro multis · About Operation CHARM