Console Compartment Door Hinge Replacement

CONSOLE COMPARTMENT DOOR HINGE REPLACEMENT

REMOVAL PROCEDURE
1. Remove the rear upper garnish molding.
2. Remove the console upper trim plate.




3. Remove the 3 screws retaining the upper hinge to the console upper trim plate.
4. Remove the hinge from the console upper trim plate.

INSTALLATION PROCEDURE
1. Position the hinge to the console upper trim plate.




2. Install the 3 screws retaining the upper hinge to the console upper trim plate.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the screws to 2.5 N.m (22 lb in).

3. Install the console upper trim plate.
4. Install the rear upper garnish molding.