Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2007 >> Cobalt L4-2.2L >> Repair and Diagnosis >> Lighting and Horns >> Brake Light Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the logical successor to CHARM, I recommend you try it!

Link: lemon-manuals.la

Brake Light Switch: Service and Repair



STOP LAMP SWITCH REPLACEMENT

REMOVAL PROCEDURE




1. Remove the accelerator pedal retaining nuts. Move the pedal aside.




2. Remove the stop lamp switch by grasping the switch and turning it counterclockwise while pulling toward the front of the vehicle.
3. Disconnect the stop lamp switch electrical connector.

INSTALLATION PROCEDURE




1. Connect the stop lamp switch electrical connector.
2. Insert the stop lamp switch into the retainer.





3. NOTE: Refer to Fastener Notice.

Install the accelerator pedal to the dash panel. Install the retaining nuts.

Tighten the accelerator pedal retaining nuts to 10 N.m (89 lb in).

4. Adjust the stop lamp switch. Refer to Stop Lamp Switch Adjustment.
pro multis · About Operation CHARM