Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2007 >> Colorado 2WD L5-3.7L >> Repair and Diagnosis >> Brakes and Traction Control >> Brake Pedal Assy >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Brake Pedal Assy: Service and Repair



Brake Pedal Assembly Replacement

Removal Procedure

Important: The brake pedal and support bracket are one piece. The brake pedal is not serviced separately from the support bracket.




1. Remove the steering column assembly.
2. Remove the stop light switch electrical connector.




3. Remove the retaining clip for the clevis pin.




4. Remove the clevis pin.




5. Remove the brake pedal support bracket to bulkhead retaining nuts.
6. Remove the brake pedal support bracket to bulkhead retaining nuts.




7. Remove the brake pedal support bracket mounting bolts.




8. Remove the brake pedal assembly.
9. Remove the stop lamp switch.

Installation Procedure




1. Install the stop lamp switch.
2. Install the brake pedal support bracket.





Notice: Refer to Fastener Notice.

3. Install the brake pedal support bracket mounting bolts.

Tighten the brake pedal mounting bolts to 27 N.m (20 lb ft).




4. Install the brake pedal mounting nuts.

Tighten the brake pedal mounting nuts to 27 N.m (20 lb ft).




5. Install the retaining clip for the clevis pin.
6. Adjust the stop lamp switch.
7. Adjust the cruise control release switch.




8. Install the stop lamp electrical connector.
9. Install the steering column assembly.

pro multis · About Operation CHARM