Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2007 >> Colorado 2WD L5-3.7L >> Repair and Diagnosis >> Power and Ground Distribution >> Testing and Inspection >> Symptom Related Diagnostic Procedures >> Power Mode Mismatch
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Power Mode Mismatch



POWER MODE MISMATCH

CIRCUIT DESCRIPTION

Correct Ignition Switch Inputs And Power Modes:




The body control module (BCM) monitors the ignition inputs Ignition Off/Run/Crank, Ignition 1 Run/Crank and the Ignition Accessory signals supplied from the ignition switch. The BCM uses the sequence that the signals appear, their voltage levels and the engine run flag (ERF) status to determine the power mode. Battery voltage is supplied to the ignition switch by the IGN TRANSD fuse. The ignition key resistor signal from the BCM provides a 5-volt supply voltage to the ignition switch. The table below shows the correct ignition switch inputs and power modes.

TEST

Step 1 - Step 7:




Step 8:




pro multis · About Operation CHARM