Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2007 >> Equinox AWD V6-3.4L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Oxygen Sensor >> Service and Repair >> Heated Oxygen Sensor 1 Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the logical successor to CHARM, I recommend you try it!

Link: lemon-manuals.la

Heated Oxygen Sensor 1 Replacement



HEATED OXYGEN SENSOR 1 REPLACEMENT

REMOVAL PROCEDURE




1. Disconnect the HO2S 1 harness connector.
2. Remove the HO2S 1 from the exhaust manifold.

INSTALLATION PROCEDURE





1. NOTE: Silicone based products will contaminate the HO2S. Use only a nickel based anti-seize compound that does not contain silicone.

Apply a small amount of anti-seize compound to the threads of the HO2S 2.

2. NOTE: Refer to Component Fastener Tightening Notice.

Install the HO2S 1 to the exhaust manifold.

Tighten the HO2S 1 to 42 N.m (31 lb ft).

3. Connect the HO2S 1 harness connector. Push in the connector until a click is heard and pull back to confirm a positive engagement.
pro multis · About Operation CHARM