Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (I know, we said we wouldn't ask any more...but it's important!)

Oil Pressure Sensor: Service and Repair

Engine Oil Pressure Sensor and/or Switch Replacement

Removal Procedure

1. Remove the starter.
2. Disconnect the oil pressure sensor electrical connector (5).

3. Remove the engine oil pressure sensor.

Installation Procedure

Notice: Refer to Fastener Notice.

1. Install the engine oil pressure sensor.

Tighten the sensor to 22 N.m (16 lb ft).

2. Connect the oil pressure sensor electrical connector (5).
3. Install the starter.