Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2007 >> Impala V6-3.5L >> Repair and Diagnosis >> Steering and Suspension >> Alignment >> Service and Repair >> Front Camber Adjustment
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Front Camber Adjustment



Front Camber Adjustment

Removal Procedure




1. Raise the vehicle and provide suitable support. Refer to Lifting and Jacking the Vehicle.
2. Remove the tire and wheel assemblies from the front and the rear axles.
3. Remove the strut from the vehicle.
4. Place the strut in a vise and file the hole lateral - oblong. Compare the appearance of the holes before filing (2) with after filing (3).
5. File the lower strut-to-knuckle attaching hole for a front camber adjustment.

Installation Procedure





Notice: Refer to Fastener Notice.

1. Install the strut to the vehicle.

Tighten the strut-to-knuckle nuts as far as to allow movement of the knuckle.

2. Install the tire and wheel assemblies.
3. Adjust the camber (1).

Tighten the strut-to-knuckle nuts to 130 N.m (96 lb ft).

4. Lower the vehicle.

pro multis · About Operation CHARM