Rear Side Door Window Channel Replacement

Rear Side Door Window Channel Replacement

Removal Procedure





Notice: Refer to Paint Damage Notice.

1. Apply masking tape to the door frame and applique.
2. Remove the rear door trim panel.
3. Remove the rear door water deflector.
4. Position the window in the full down position.
5. Remove the window channel bolt (2).
6. Remove the window channel from the door.

Installation Procedure




1. Install the window channel (1) in the door.

Notice: Refer to Fastener Notice.

2. Install the window run channel bolts (2).

Tighten the bolts to 10 N.m (89 lb in).

3. Inspect the window for proper operation.
4. Remove the masking tape from the frame and applique.
5. Install the rear door water deflector.
6. Install the rear door trim panel.