Suspension General Diagnosis

Symptoms - Suspension General Diagnosis

Important: The following steps must be completed before using the symptom tables.

1. Determine whether the vehicle is equipped with an electrically assisted or active suspension system. Perform electrical diagnosis prior to beginning mechanical diagnosis.
2. Review the system description and operation in order to familiarize yourself with the system functions. Refer to the appropriate description and operation:

* Front Suspension Description and Operation
* Rear Suspension Description and Operation
* General Description

Visual/Physical Inspection

* Inspect for aftermarket devices which could affect the operation of any of the Suspension subsystems.
* Inspect the easily accessible or visible system components for obvious damage or conditions which could cause the symptom.
* Inspect for proper tire size and inflation pressure. Refer to Label - Vehicle Certification, Tire Place Card, Anti-Theft and Service Parts ID.

Symptom List

Refer to a symptom diagnostic procedure from the following list in order to diagnose the symptom:

* Ride Diagnosis Ride Diagnosis
* Vehicle Leads/Pulls Vehicle Leads/Pulls
* Body Leans or Sways in Corners Body Leans or Sways in Corners
* Suspension Bottoms Suspension Bottoms
* Torque Steer Torque Steer
* Memory Steer Memory Steer
* Noise Diagnosis - Front Suspension Noise Diagnosis - Front Suspension
* Noise Diagnosis - Rear Suspension Noise Diagnosis - Rear Suspension
* Struts or Shock Absorbers Testing - On Vehicle Struts or Shock Absorbers Testing - On Vehicle
* Wheel Bearings Diagnosis Wheel Bearings Diagnosis
* Radial Tire Lead/Pull Correction Radial Tire Lead/Pull Correction