Power Windows Description and Operation (Rear Window)

Power Windows Description and Operation (Rear Window)

The power sliding rear window motor is controlled from the rear window open/close switch through open and close relays. The open/close switch is supplied voltage from the body control module (BCM) accessory voltage output circuit. When the switch is pressed in the open or closed position the open or closed relay coil will be supplied accessory voltage and energized through the appropriate relay control circuit. While the open and close relays are in a de-energized state both motor control circuits will be closed to ground. When one of the relays is energized its motor control circuit will be closed to the battery voltage supply circuit and the other motor control circuit will remain grounded through the de-energized relay.