Turn Signal Switch Cancel Cam Position Plate Replacement

Turn Signal Switch Cancel Cam Position Plate Replacement

Tools Required
* J 23653-SIR Steering Column Lock Plate Compressor
* J 42137 Cam Orientation Plate Adapter

Removal Procedure

1. Remove the inflatable restraint steering wheel module coil and the inflatable restraint steering wheel module coil wave washer.





Important: DISCARD the old steering shaft lock plate ring.

2. Remove the following parts from the steering shaft:

1. Steering shaft lock plate retaining ring (1) using compressor J 23653-SIR and adapter J 42137.
2. Turn signal switch cancel cam position plate (2)
3. Turn signal switch cancel cam (3)

Installation Procedure





Important: Use a NEW steering shaft lock plate retaining ring.

1. Install the following parts onto the steering shaft:

1. Lubricate the turn signal switch cancel cam (3) with GM P/N 12377900 (Canadian P/N 10953529).
2. Turn signal switch cancel cam position plate (2)
3. Steering shaft lock plate retaining ring (1) using compressor J 23653-SIR and adapter J 42137.

2. Install the inflatable restraint steering wheel module coil and the inflatable restraint steering wheel module coil wave washer.