Transfer Case Rear Output Shaft Speed Sensor Replacement - Right Side

Transfer Case Rear Output Shaft Speed Sensor Replacement - Right Side

Removal Procedure





1. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
2. Disconnect the right rear speed sensor electrical connector (3).





3. Remove the right rear speed sensor.

Installation Procedure





1. Notice:
Refer to Fastener Notice.

Install the right rear speed sensor.

Tighten the speed sensor to 15 Nm (11 ft. lbs.).





2. Connect the right rear speed sensor electrical connector (3).
3. Lower the vehicle.