Transfer Case Rear Output Shaft Speed Sensor Replacement - Left Side

Transfer Case Rear Output Shaft Speed Sensor Replacement - Left Side

Removal Procedure





1. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
2. Disconnect the left rear speed sensor electrical connector (4).





3. Remove the left rear speed sensor.

Installation Procedure





1. Notice:
Refer to Fastener Notice.

Install the left rear speed sensor.

Tighten the speed sensor to 15 Nm (11 ft. lbs.).





2. Connect the left rear speed sensor electrical connector (4).
3. Lower the vehicle.