Catalyst Shield: Service and Repair

Catalytic Converter Heat Shield Replacement

Removal Procedure
Caution: Refer to Exhaust Service Caution (Service Precautions) .
Caution: Refer to Protective Goggles and Glove Caution (Protective Goggles and Glove Warning) .

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair) .




2. Remove the 5 nuts securing the heat shield to the floor panel.
3. Remove the catalytic converter heat shield from the floor panel.

Installation Procedure




1. Position the catalytic converter heat shield to the floor panel studs.

Notice: Refer to Fastener Notice (Fastener Notice) .

2. Install the 5 nuts securing the heat shield to the floor panel.

Tighten the heat shield nuts to 9 N.m (80 lb in).

3. Lower the vehicle.