Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2008 >> Equinox AWD V6-3.6L >> Repair and Diagnosis >> Heating and Air Conditioning >> Refrigerant Pressure Sensor / Switch >> Low Pressure Sensor / Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Low Pressure Sensor / Switch: Service and Repair



Air Conditioning (A/C) Refrigerant Low Temperature Sensor Replacement

Removal Procedure




1. Remove the left side insulator/closeout panel.
2. If equipped with OnStar(R), remove the communications interface module.
3. Disconnect the temperature sensor connector from the temperature sensor.
4. Twist the temperature sensor one quarter turn to disengage from the evaporator case assembly.
5. Remove the temperature sensor from the evaporator case assembly.

Installation Procedure




1. Install the temperature sensor to the evaporator case assembly.
2. Twist the temperature sensor one quarter turn to engage to the evaporator case assembly.
3. Install the temperature sensor connector to the temperature sensor.
4. If removed, install the communications interface module.
5. Install the left side insulator/closeout panel.
pro multis · About Operation CHARM