Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2008 >> Equinox AWD V6-3.6L >> Repair and Diagnosis >> Maintenance >> Filters >> Air Cleaner Housing >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Air Cleaner Housing: Service and Repair



Air Cleaner Assembly Replacement

Removal Procedure




1. Remove the air cleaner outlet duct.
2. Disconnect the engine wiring harness electrical connector from the mass air flow (MAF)/intake air temperature (IAT) sensor.




3. Remove the air cleaner bolt.
4. Disengage the air cleaner pins from the front panel and remove the air cleaner assembly.
5. If replacing the air cleaner assembly, remove the MAF/IAT sensor.

Installation Procedure




1. If the air cleaner assembly was replaced, install the MAF/IAT sensor.
2. Install the air cleaner assembly by inserting the two pins into the front panel.

Notice: Refer to Fastener Notice.

3. Install the air cleaner bolt.

Tighten the bolt to 10 N.m (89 lb in).




4. Connect the engine wiring harness electrical connector to the MAF/IAT sensor.
5. Install the air cleaner outlet duct.
pro multis · About Operation CHARM