Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2008 >> Express 2500 V8-6.6L DSL Turbo >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Transmission Speed Sensor >> Service and Repair >> Vehicle Input Speed Sensor Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Vehicle Input Speed Sensor Replacement



Vehicle Input Speed Sensor Replacement

Removal Procedure





1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Disconnect the input speed sensor (1) electrical connector.
3. Remove the input speed sensor bolt.
4. Remove the input speed sensor (1) and the bracket assembly from the case.
5. Inspect the vehicle speed sensor assembly (1) for any evidence of damage.



Installation Procedure





1. Lubricate the input speed sensor seal with automatic transmission fluid.
2. Install the input speed sensor (1) and the bracket assembly.

Notice: Refer to Fastener Notice .

3. Install the bolt.

Tighten the bolt to 11 N.m (96 lb in).

4. Connect the input speed sensor electrical connector.
5. Lower the vehicle.


pro multis · About Operation CHARM