Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2008 >> Malibu V6-3.6L >> Repair and Diagnosis >> Body and Frame >> Frame >> Subframe >> Front Subframe Mount >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la
If it fails: lemon-manuals.org.ua

Or, hide this message: temporarily or permanently

Front Subframe Mount: Service and Repair






Drivetrain and Front Suspension Frame Insulator Replacement

Tools Required

Removal Procedure





1.Remove the frame. Refer to Frame Replacement .

2.Remove cradle bushing with a rubber mallet.

Installation Procedure





1.Install clamp
J-45725 frame bushing installer onto the bushing leaving about an 1/8 inch from the bottom of the bushing.





2.Align the split of the bushing to the front of the frame.





3.Using
J-45725 frame bushing installer install the bushing until the entire radius of the bushing is halfway recessed in the cradle.





4.Remove the
J-45725 frame bushing installer clamp.





5.Install the bushing using the
J-45725 frame bushing installer until the lip of the bushing is fully seated to the bottom of the cradle assembly.

6.Install the frame. Refer to Frame Replacement .

pro multis · About Operation CHARM