Rear Camber Adjustment
Rear Camber Adjustment
1. Loosen the inner lower control arm cam bolt nuts.
2. Rotate the cam bolts to the required camber specification setting. Refer to Wheel Alignment Measurement (Service and Repair) .
Notice: Refer to Fastener Notice .
3. Maintain the camber setting while tightening the cam bolt nuts.
Tighten the inner lower control arm (front) bolt nut to 110 N.m (81 lb ft).
Important: Check the toe setting AFTER changing camber or caster.
4. Check the camber setting after tightening.
5. Adjust the camber setting if necessary.