Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2008 >> Silverado 2500 2WD V8-6.6L DSL Turbo >> Repair and Diagnosis >> Powertrain Management >> Glow Plug System >> Glow Plug >> Service and Repair >> Glow Plug Replacement - Bank 2
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Glow Plug Replacement - Bank 2



Glow Plug Replacement - Bank 2

Removal Procedure




1. Disconnect the negative battery cable.
2. Remove the left wheelhouse panel.
3. Remove the engine wiring harness nut(s) from the glow plug(s).
4. Remove the engine wiring harness lead(s) from the glow plug(s).
5. Remove the glow plug(s) from the cylinder head.

Installation Procedure






Notice: Refer to Fastener Notice.

1. Install the glow plug(s) to the cylinder head.

Tighten the plug to 18 N.m (13 lb ft).

2. Install the engine wiring harness lead(s) to the glow plug(s).
3. Install the engine wiring harness nut(s) to the glow plug(s).

Tighten the nut to 1.7 N.m (15 lb in).

4. Install the left wheelhouse panel.
5. Connect the negative battery cable.
pro multis · About Operation CHARM