Engine Ground Strap Replacement (6.6L)

Engine Ground Strap Replacement (6.6L)

Removal Procedure




1. Remove the engine ground strap bolt (2) from the rear of the cylinder head.
2. Reposition the engine ground strap (1) from the cylinder head.




3. Remove the ground strap nut (1) from the stud on the plenum front panel.
4. Remove the ground strap (2) from the stud and the vehicle.

Installation Procedure




1. Install the ground strap (2) to the vehicle and the stud on the plenum front panel.
2. Install the ground strap nut (1) to the stud on the plenum front panel.

Tighten the nut to 9 N.m (80 lb in).




3. Position the ground strap (1) to the cylinder head.
4. Install the ground strap bolt (2) to the cylinder head.

Tighten the bolt to 16 N.m (12 lb ft).