Auxiliary Generator Replacement (6.6L)

Auxiliary Generator Replacement (6.6L)

Removal Procedure

Caution: Refer to Battery Disconnect Caution.




1. Disconnect the negative battery cable.
2. Remove the drive belt.
3. Disconnect the engine wiring harness electrical connector (1) from the generator.
4. Reposition the engine wiring harness boot (4) in order to access the terminal stud.
5. Remove the engine wiring harness nut (3).
6. Remove the engine wiring harness terminal (2) from the generator.




7. Remove the generator bolts (1).
8. Remove the generator.

Installation Procedure




1. Install the generator.

Notice: Refer to Fastener Notice.

2. Install the generator bolts (1).

Tighten the bolts to 50 N.m (37 lb ft).




3. Install the engine wiring harness terminal (2) to the generator.
4. Install the engine wiring harness nut (3).

Tighten the nut to 9 N.m (80 lb in).

5. Position the engine wiring harness boot (4) in order to cover the terminal stud.
6. Connect the engine wiring harness electrical connector (1) to the generator.
7. Install the drive belt.
8. Connect the negative battery cable.