Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2008 >> Silverado 3500 2WD V8-6.6L DSL Turbo >> Repair and Diagnosis >> Testing and Inspection >> Programming and Relearning >> Control Solenoid Valve and Transmission Control Module Assembly Programming and Setup (6L50/6L80/6L90)
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the logical successor to CHARM, I recommend you try it!

Link: lemon-manuals.la

Control Solenoid Valve and Transmission Control Module Assembly Programming and Setup (6L50/6L80/6L90)



Control Solenoid Valve and Transmission Control Module Assembly Programming and Setup (6L50/6L80/6L90)

1. The control solenoid valve and transmission control module assembly must be programmed with the proper software/calibrations. Ensure that the following conditions exist in order to prepare for control solenoid valve and transmission control module assembly programming:

* The battery is fully charged.
* The ignition switch is in the RUN position.
* The Techline equipment cable connection at the data link connector (DLC) is secure.

2. Program the control solenoid valve and transmission control module assembly using the latest software matching the vehicle. Refer to up-to-date Techline equipment user instructions.
3. If the control solenoid valve and transmission control module assembly fails to program, proceed as follows:

1. Ensure that the control solenoid valve and transmission control module assembly connection is OK.
2. Inspect the Techline equipment for the latest software version.
3. Attempt to program the control solenoid valve and transmission control module assembly. If the control solenoid valve and transmission control module assembly still cannot be programmed properly, replace the control solenoid valve and transmission control module assembly.
pro multis · About Operation CHARM