Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (This is the last day we'll be asking)
Instrument Panel Insulator Panel Replacement - Right Side
Instrument Panel Insulator Panel Replacement - Right Side
Removal Procedure
1. Remove the 2 screws that retain the insulator panel to the instrument panel (I/P).
2. Partially remove the insulator panel.
3. Remove the electrical connector retaining clip from the back side of the insulator panel, if equipped.
4. Remove the insulator panel from the vehicle.
Installation Procedure
1. Install the insulator panel to the vehicle, positioning the insulator panel to the I/P.
2. Install the electrical connector retaining clip to the back side of the insulator panel, if equipped.
3. Insert the insulator panel retaining tab into the cowl slot.
4. Seat the insulator panel retaining clip to the I/P substrate.
Notice: Refer to Fastener Notice.
5. Install the 2 insulator panel retaining screws.
Tighten the screws to 2.5 N.m (22 lb in).