Differential Carrier Internal Gear Assemble

Differential Carrier Internal Gear Assemble

Tools Required

J 28585 Snap Ring Remover




1. Inspect the differential carrier internal gear assembly (693) for the following conditions:

* Damaged or worn bushings
* Plugged lube oil holes
* Damaged case splines
* Damaged or worn gear teeth
* A damaged or worn park pawl assembly (694)
* A damaged snap ring (692)




2. Install the differential carrier internal gear assembly (693) into the case. Align the park pawl assembly with the park pawl actuator assembly.




3. UseJ 28585 or a long screwdriver in order to install the snap ring (692) into the case as shown.