Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2008 >> Uplander V6-3.9L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Transmission Mount >> Service and Repair >> Transmission Mount Bracket Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Transmission Mount Bracket Replacement



Transmission Mount Bracket Replacement

Removal Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair).
2. Remove the left front tire and wheel. Refer to Tire and Wheel Removal and Installation (Service and Repair).
3. Remove the left engine splash shield. Refer to Engine Splash Shield Replacement (Service and Repair).
4. Use a utility stand with a block of wood in order to support the transaxle.




5. Remove the transaxle mount upper nuts.




6. Remove the transaxle mount bracket bolts.
7. Remove the transaxle mount bracket.

Installation Procedure

1. Position the transaxle mount bracket.





Notice: Refer to Fastener Notice.

2. Install the transaxle mount bracket bolts.

Start with the forward lower bolt and work clockwise to tighten the transaxle mount bracket bolts to 95 N.m (70 lb ft).

3. Remove the utility stand.




4. Install the transaxle mount upper nuts.

Tighten the nuts to 47 N.m (35 lb ft).

5. Install the left engine splash shield. Refer to Engine Splash Shield Replacement (Service and Repair).
6. Install the left front tire and wheel. Refer to Tire and Wheel Removal and Installation (Service and Repair).
7. Lower the vehicle.

pro multis · About Operation CHARM