Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2009 >> Cobalt L4-2.2L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Cylinder Block Assembly >> Engine Block Heater >> Service and Repair >> Coolant Heater Cord Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Coolant Heater Cord Replacement




Coolant Heater Cord Replacement

Removal Procedure




1. Disconnect the coolant heater cord (1).




2. If equipped with regular production options (RPOs) LE5/L61, remove the air cleaner nut (1).
3. Remove the heater cord clip (2) from the shock tower stud (3).




4. If equipped with RPO LSJ, remove the coolant heater clip nut (1).
5. Remove the heater cord clip (2) from the shock tower stud (3).
6. Remove the coolant heater cord.

Installation Procedure




1. Install the coolant heater cord.
2. If equipped with RPO LSJ, install the heater cord clip (2) to the shock tower stud (3).

Caution: Refer to Fastener Caution (Fastener Caution).

3. Install the coolant heater clip nut (1) and tighten to 10 Nm (89 lb in).




4. If equipped with RPOs LE5/L61, install the heater cord clip (2) to the shock tower stud (3).
5. Install the air cleaner nut (1) and tighten to 10 Nm (89 lb in).




6. Connect the engine coolant heater cord (1).

pro multis · About Operation CHARM