Restraints - Unblocking Passenger Seat Belt Retractor
INFORMATIONBulletin No.: 09-09-40-002
Date: March 12, 2009
Subject:
Information on Unblocking Front Passenger Seat Belt Retractor When Webbing Is Seized/Won't Release
Models:
2008-2009 Chevrolet HHR
Built Between April 1, 2008 and December 8, 2008
The seat belt automatic locking retractor (ALR) is activated when the seat belt webbing is fully extracted. If this occurs in combination with the shoulder belt height adjuster being placed at the uppermost position, the retractor may become blocked. The customer will be able to return the seat belt webbing to its original position but will not be able to pull the webbing out again.
If this blocked condition is found, DO NOT replace the seat belt assembly.
In order to unblock the retractor, push down on the release button (1) and slide the shoulder belt height adjuster towards its lowest position, until the ALR is unblocked. Pull out the webbing to verify that the retractor is releasing and working properly.
The customer should be instructed on the proper operation of the seat belts and how to unblock the retractor. You may wish to give the customer a copy of this bulletin for future reference.
Disclaimer