Emergency Vehicle Rear Compartment Lid Lamp Replacement

Emergency Vehicle Rear Compartment Lid Lamp Replacement (Impala RPO T53)

Removal Procedure




1. Open the rear compartment.
2. Disconnect the electrical connectors from the rear compartment lid lamp(s).
3. Disconnect the electrical connector from the flasher fuse (1).
4. Remove the flasher fuse (1) if required.




5. Remove the rear compartment lid lamp(s) from the rear compartment lid.

Installation Procedure




1. Position the rear compartment lid lamp(s) from the rear compartment lid.
Caution: Refer to Fastener Caution (Fastener Caution).




2. Install the flasher fuse (1) if required.
3. Connect the electrical connector to the flasher fuse (1).
4. Connect the electrical connectors to the rear compartment lid lamp(s).
5. Close the rear compartment.