Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2009 >> Impala V6-3.5L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Service and Repair >> Overhaul >> Driven Sprocket Support Assemble
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Driven Sprocket Support Assemble




Driven Sprocket Support Assemble

Special Tools

J 36850 - Assembly Lubricant or equivalent

For equivalent regional tools, refer to Special Tools (Tools and Equipment).




1. Use J 36850 - lubricant or equivalent in order to secure the second clutch housing thrust washer (611) to the driven sprocket support assembly (609).




2. Finger start two 13 mm case cover bolts (434) into the driven sprocket support assembly (609).

Note: If the driven sprocket support assembly (609) is not flush with or slightly below the case, then one of the clutches is not fully seated.

3. Using the bolts (434), lift the driven sprocket support assembly (609) into the case and align as shown. The top of the driven sprocket support assembly (609) should be flush with the case.

pro multis · About Operation CHARM