Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Differential Carrier Assembly Final Assembly




Differential Carrier Assembly Final Assembly

Special Tools
* J 45225 Axle Seal Installer
* J 8092 Universal Driver Handle - 3/4 in - 10

1. Inspect the alignment mark between the differential bearing adjuster and the differential carrier assembly case. If the line between the differential bearing adjuster and the differential carrier assembly case is not aligned, re-align the 2 components as necessary.




2. Install the left side inner shaft seal using the J 45225 (2) and the J 8092 (1).




3. Install the right side inner shaft seal using the J 45225 (2) and the J 8092 (1).

Caution: Refer to Component Fastener Tightening Caution (Component Fastener Tightening Caution).

4. Install the drain plug and tighten to 32 Nm (24 lb ft).
5. Install the fill plug and tighten to 32 Nm (24 lb ft).