Transmission Pressure Test Port: Service and Repair
Automatic Transmission Fluid Pressure Test Hole Plug Replacement
Removal Procedure
1. Remove the throttle body air inlet duct. Refer to Air Cleaner Inlet Duct Replacement Air Cleaner Inlet Duct Replacement.
2. Remove the pressure test hole plug (38).
Installation Procedure
Caution: Refer to Fastener Caution Fastener Caution.
1. Install the pressure test hole plug (38) and tighten to 12 Nm (106 lb in).
2. Install the throttle body air inlet duct. Refer to Air Cleaner Inlet Duct Replacement Air Cleaner Inlet Duct Replacement.