Camshaft Bearing

Intake Camshaft

Tighten the camshaft cap bolts in increments of 3 turns until they are seated.
Tighten 10 Nm (89 lb in)

Number 6 intake camshaft rear cap
Tighten the cap bolts evenly
First pass 5 Nm (44 lb in).
Second pass 10 Nm (89 lb in).
Back off the cap bolts 120 degrees.
Final pass 10 Nm (89 lb in)

Exhaust Camshaft

Tighten the bearing cap bolts in increments of 3 turns until they are seated
Tighten 10 Nm (89 lb in)