Tightening Torques & Sequences

CYLINDER HEAD TORQUE AND SEQUENCE






Cylinder Head Bolt - 12
First Pass 30 Nm (22 lb ft)
Final Pass 155 degrees

Cylinder Head End Bolts - 2 Shot
First Pass 7 Nm (62 lb in)
Final Pass 60 degrees

Cylinder Head End Bolts - 1 Long
First Pass 7 Nm (62 lb in)
Final Pass 120 degrees

BOLT RE-USABILITY

Caution: This component uses torque-to-yield bolts. When servicing this component do not reuse the bolts, New torque-to-yield bolts must be installed. Reusing used torque-to-yield bolts will not provide proper bolt torque and clamp load. Failure to install NEW torque-to-yield bolts may lead to engine damage.

INTAKE MANIFOLD TORQUE AND SEQUENCE

Intake Manifold Bolt 10 Nm (89 lb in).

CAMSHAFT BEARING CAP TORQUE

Camshaft Cap Bolt 12 Nm (106 lb in)

MAIN BEARING CAP TORQUE AND SEQUENCE






Crankshaft Main Bearing Cap Bolts
First Pass 25 Nm (18 lb ft)
Final Pass 180 degrees

ROD BEARING CAP TORQUE AND SEQUENCE

Connecting Rod Bearing Cap Bolts
First Pass 25 Nm (18 lb ft)
Final Pass 110 degrees

CRANKSHAFT PULLEY TORQUE

Crankshaft Balancer Bolt
First Pass 150 Nm (110 lb ft)
Final Pass 180 degrees

FLYWHEEL/FLEXPLATE TORQUE & SEQUENCE

Automatic Transmission

Engine Flywheel Bolt
First Pass 40 Nm (30 lb ft)
Final Pass 45 degrees

Manual Transmission

Engine Flywheel Bolt
First Pass 40 Nm (30 lb ft)
Final Pass 45 degrees

OIL PUMP TORQUE & SEQUENCE

Oil Pump Cover Bolt 10 Nm (89 lb in)

EXHAUST MANIFOLD TORQUE & SEQUENCE






Tighten The Exhaust Manifold Bolts
First Pass 20 Nm (15 lb ft).
Second Pass 20 Nm (15 lb ft).
Final Pass 20 Nm (15 lb ft).

WATER PUMP TORQUE AND SEQUENCE






Water Pump Bolts 10 Nm (89 lb in)