Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2011 >> Aveo L4-1.6L >> Repair and Diagnosis >> Brakes and Traction Control >> Hydraulic System >> Brake Proportioning/Combination Valve >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Brake Proportioning/Combination Valve: Service and Repair




Brake Proportion Valve Replacement

Removal Procedure




1. Disconnect the brake lines from the proportioning valves.
2. Remove the valves from the master cylinder body.

Installation Procedure




Warning: Refer to Brake Fluid Warning (Dangers, Warnings, and Cautions).


Caution: Refer to Fastener Caution (Fastener Caution).

Note: Since these valves are adjusted in pairs to the correct control range, they must be replaced in pairs.

1. Install the proportioning valves to the cylinder body.

Tighten the proportioning valves to 40 Nm (30 lb ft).

2. Connect the brake lines to the valves.

Tighten the brake lines to 16 Nm (12 lb ft).

3. Bleed the braking system. Refer to Hydraulic Brake System Bleeding (Hydraulic Brake System Bleeding).

pro multis · About Operation CHARM