Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2011 >> Express 2500 V8-4.8L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Cylinder Block Assembly >> Engine Block Heater >> Service and Repair >> Coolant Heater Cord Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Coolant Heater Cord Replacement




Coolant Heater Cord Replacement

Removal Procedure




1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair).
2. Disconnect the coolant heater electrical connector (1).




3. Remove the coolant heater cord retainer (1).




4. Remove the coolant heater cord retainer (1).




5. Remove the coolant heater cord retainer (1).

Note: Note location of cord prior to removal.

6. Remove the coolant heater cord.

Installation Procedure

Caution: The heater cord must not touch the engine, hot pipes, manifold, or any moving parts. Route the cord to the left front of the engine compartment securing with tie straps as necessary to prevent damage.




1. Install the coolant heater cord.
Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the coolant heater cord retainer (1).




3. Install the coolant heater cord retainer (1).




4. Install the coolant heater cord retainer (1).




5. Connect the coolant heater electrical connector (1).
6. Lower the vehicle.

pro multis · About Operation CHARM