Cylinder Head Assembly

Cylinder Head Bolt






First Pass 30 Nm (22 lb ft)
Final Pass 155 degrees

HEAD BOLT REUSE/REPLACE

Note: Always use new cylinder head bolts.

Cylinder Head
Surface Flatness - Block Deck
Transverse 0.030 mm (0.0012 in)
Longitude 0.050 mm (0.002 in)
Overall 0.1 mm (0.004 in)

Block
Cylinder Head Deck Surface Flatness
Transverse 0.030 mm (0.0012 in)
Longitude 0.050 mm (0.002 in)
Overall 0.08 mm (0.0031 in)

Camshaft Cap Bolt 10 Nm (89 lb in)

Intake Manifold Specifications

Exhaust Manifold Service and Repair

Camshaft Gear/Sprocket Specifications