Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2011 >> Impala V6-3.5L >> Repair and Diagnosis >> Starting and Charging >> Power and Ground Distribution >> Fuse Block >> Service and Repair >> Removal and Replacement >> Accessory Wiring Junction Block Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Accessory Wiring Junction Block Replacement




Accessory Wiring Junction Block Replacement

Removal Procedure




1. Remove the electrical center cover (1).
2. Disconnect the positive battery cable from junction box. Refer to Battery Positive and Negative Cable Replacement (LGD/LZE) (Service and Repair).




3. Remove the fasteners (1) securing the electrical center board (2).
4. Unlock the tabs on the electrical center board.
5. Lift up on the electrical center board.




6. Remove the fasteners (1) securing the electrical center bracket (2) to vehicle.

Installation Procedure





Caution: Refer to Fastener Caution (Fastener Caution).

1. Install fasteners (1) securing the electrical center (2) to vehicle.

Tighten the fasteners to 10 Nm (86 lb in).




2. Install the fasteners (1) securing the electrical center board (2).

Tighten the fasteners to 7 Nm (62 lb in).

3. Connect the positive battery cable. Refer to Battery Positive and Negative Cable Replacement (LGD/LZE) (Service and Repair).




4. Install the electrical center cover (1).

pro multis · About Operation CHARM