127. Water Pump Installation

Water Pump Installation

Special Tools

EN-46104 - Water Pump Pulley Holding Tool

For equivalent regional tools, refer to Special Tools (Tools and Equipment).




1. Ensure that the engine front cover and water pump are clear of old gasket material.
2. Place a new water pump gasket on the water pump.
3. Place the water pump in position on the front cover.

Caution: Refer to Fastener Caution (Fastener Caution).

4. Install the water pump bolts and tighten to 10 Nm (89 lb in).




5. Install the water pump pulley.
6. Loosely install the water pump pulley bolts.




7. Install the EN-46104 - tool (1) onto the water pump pulley and tighten to 10 Nm (89 lb in).