Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2011 >> Volt L4-1.4L Elect >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Braking Sensor/Switch >> Service and Repair >> Brake Pedal Position Sensor Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Brake Pedal Position Sensor Replacement




Brake Pedal Position Sensor Replacement

Removal Procedure

1. Disconnect the brake pedal position sensor electrical connector.




2. Remove the brake pedal position sensor bolt (1).




3. Remove the brake pedal position sensor (1) and spacer (2).

Installation Procedure




1. Align the locating pin on the brake pedal position sensor (1) to the hole on the spacer (2).
2. Align the locating pin on the brake pedal position sensor to the hole on the brake pedal assembly bracket.
3. Ensure the brake pedal position sensor fork is properly located on the brake pedal pin.





Caution: Refer to Fastener Caution Fastener Caution.

4. Install the brake pedal position sensor bolt (1) and tighten to 9 Nm (80 lb in).
5. Connect the brake pedal position sensor electrical connector.
6. Calibrate the brake pedal position sensor. Refer to Brake Pedal Position Sensor Calibration Brake Pedal Position Sensor Calibration.

pro multis · About Operation CHARM