Steering Wheel Controls

Steering Wheel Controls Description and Operation

The steering wheel control switches duplicate the function of the primary controls of the associated component through a network of multiple momentary contact switches and a series of resistors. The instrument panel cluster (IPC) supplies voltage to the switches and monitors the return signal. When a switch is pressed, a specific voltage drop across the resistors. The IPC identifies the switch selected, sends a serial data message to the component controlled by the switch and activates the feature.

This section is intended to diagnosis the circuits between the IPC and the steering wheel control switches. If the primary control for the device is inoperative, refer to the appropriate section for the component the steering wheel control switch is used for.