Air Hose Test
Air Hose Test
Caution:
The air hose test should only be used on fully cured urethane adhesive. Otherwise, damage to the urethane adhesive bead could result in additional leaks.
Important:
Use a liquid detergent, diluted with water in a spray bottle. Begin at the bottom and gradually move up and across the top.
1. Spray the window at the edges.
Important:
The compressed air should not exceed 205 kPa (30 psi).
2. Have an assistant inside of the vehicle with an air hose.
Important:
Bubbles will form in the soap solution at the location of the leak.
3. Have the assistant aim the compressed air at the suspected areas.