9000 MI or 14400 KM
LubricateSuspension
Severe Commercial Use Vehicles Only: Lubricate chassis components.
Doors
Lubricate body hinges and latches, key lock cylinders, hood latch assemblies, secondary latches, pivots, spring anchor and release pawl, hood and door hinges, rear folding seats, and liftgate hinges. More frequent lubrication may be required when the vehicle is exposed to a corrosive environment. Applying silicone grease on weatherstrips with a clean cloth makes them last longer, seal better, and not stick or squeak.
Check
Spare Tire Carrier
Check spare wheel retainer. If loose, tighten with a torque wrench to 4.5 +/- 0.5 Nm.
Shift Interlock, A/T
Automatic Transmission Shift Lock Control Function Check. Refer to Vehicle Checks / Automatic Transmission Shift Lock Control Function Check.
Parking Brake System
Park Brake and P (Park) Mechanism Check. Refer to Vehicle Checks / Park Brake and P (Park) Mechanism Check.
Neutral Safety Switch
Starter Switch Check. Refer to Vehicle Checks / Starter Switch Check.
Ignition Lock
Ignition Transmission Lock Check. Refer to Vehicle Checks / Ignition Transmission Lock Check.
Hood Shock / Support
Hood/Decklid/Liftgate Support Gas Strut Service: Visually inspect gas strut, if equipped, for signs of wear, cracks, or other damage. Check the hold open ability of the gas strut.
Accelerator Pedal
Inspect accelerator pedal for damage, high effort, or binding. Replace if needed.
Inspect
Wiper Blade
Inspect wiper blades for wear, cracking, or contamination. Clean the windshield and wiper blades, if contaminated. Replace wiper blades that are worn or damaged.
Washer Fluid
Inspect windshield washer fluid level and add fluid as needed.
Tires
Inspect tire wear, and inflation pressure.
Steering and Suspension
Visually inspect front and rear suspension and steering system for damaged, loose, or missing parts, signs of wear.
Restraints and Safety Systems
Inspect restraint system components. Make sure the safety belt reminder light and all your belts, buckles, latch plates, retractors and anchorages are working properly. Look for any other loose or damaged safety belt system parts. If you see anything that might keep a safety belt system from doing its job, have it repaired. Have any torn or frayed safety belts replaced. Also look for any opened or broken air bag coverings, and have them repaired or replaced. The air bag system does not need regular maintenance.
Fuel Supply Line
Inspect fuel system for damage or leaks.
Fluids
Visually check for any leaks or damage. A fluid loss in any Fluids visual leak check (or every 12 months, whichever occurs first). A leak in any system must be repaired and the fluid level checked.
Exhaust System
Inspect exhaust system and nearby heat shields for loose or damaged components.
Cooling System
Inspect engine cooling system. Visual inspection of hoses, pipes, fittings, and clamps. Replace as needed.
Coolant
Inspect engine coolant level. Add coolant if necessary.
Brakes and Traction Control
Inspect Brake System (or every 12 months whicherer occurs first). Visually inspect brake lines and hoses for proper hook-up, binding, leaks, cracks, chafing, etc. Inspect disc brake pads for wear and rotors for surface condition. Inspect other brake parts, including calipers, parking brake, etc.
Air Filter Element
Inspect engine air cleaner filter. If necessary, replace filter.
Replace
Oil Filter, Engine
Engine Oil
Change engine oil and filter, or every 12 months whichever occurs first. Reset the oil life system.