Fuel Tank Pressure Sensor: Service and Repair

Fuel Tank Pressure Sensor Replacement

Removal Procedure

1. Remove the fuel tank. Refer to Fuel Tank Replacement Removal and Replacement.





2. Disconnect the electrical connector (2) from the fuel tank pressure sensor (1).

Note:
Do not damage the retainer (5).

3. Unlock and lift the retainer (5).

4. Release the retainers (4).

5. Pull the fuel tank pressure sensor (1) upward to remove the fuel tank pressure sensor (1) from the fuel tank (6).

6. Remove the fuel tank pressure sensor seal (3)

7. Discard the fuel tank pressure sensor seal (3).

Installation Procedure





1. Install a NEW fuel tank pressure sensor seal (3).

Note:
Do not damage the retainer (5).

2. Lift the retainer (5).

Note:
Listen for and audible click to confirm correct installation of the fuel pressure sensor to the retainers (4)

3. Install the fuel tank pressure sensor (1) to the fuel tank (6).

4. Lock the retainer (5) into its locking position.

5. Connect the electrical connector (2) to the fuel tank pressure sensor (1).

6. Install the fuel tank. Refer to Fuel Tank Replacement Removal and Replacement.